Label Printer
GoDEX DT200+ Label Printer
Compact 2" (60mm) direct thermal 203DPI desktop label printer
203 dpiDirect thermal178mm / sec54mm (2.12")Ethernet
The DT200+ series is a cleverly conceived design that combines multiple capabilities into a single platform. It provides 203 dpi or 300 dpi printing resolution and the DT200i+ features a 2.4-inch color display for easy operation. An extensive range of optional accessories are also available, and the DT200L+ even supports linerless media printing. This series can fulfill all of your direct thermal printing requirements.
At a glance
| Print Method | Direct Thermal |
| Resolution | 203 dpi (8 dots/mm) |
| Print Speed | 178mm / sec (7 ips) |
| Print Width | 54mm (2.12") |
| Interface | USB 2.0 (B-Type) Serial port: RS-232 (DB-9) Ethernet port (R |
Why choose the GoDEX DT200+
203 dpi resolutionSupports 203 dpi printing resolution
Wall mountableSmall footprint with a wall-mountable design for space optimization
Auto media calibrationThe innovative easy-to-use auto-calibration button facilitates media detection and positioning
Adjustable print lineAdjustable TPH print line to optimize printability
Several interfaces as standardMultiple connection interfaces for multiple applications
Optional Bluetooth or Wi-FiBluetooth or Wi-Fi module
Where it fits
- Short life labels. Direct thermal needs no ribbon at all, which makes it the cheaper way to run shipping labels, pick tickets and anything read within weeks rather than years.
- Fitting an existing system. With the standard Godex languages emulation it can usually take the label formats your current software already sends, which matters more than the hardware when you are replacing a printer.
Full specifications
| Print Method | Direct Thermal |
| Resolution | 203 dpi (8 dots/mm) |
| Print Speed | 178mm / sec (7 ips) |
| Print Width | 54mm (2.12") |
| Print Length | Min. 0.16" (4 mm)** - Max . 279.53" (7100 mm) |
| Processor | 32-bit RISC CPU |
| Memory | Flash: 128 MB Flash and SDRAM: 128 MB |
| Interface | USB 2.0 (B-Type) Serial port: RS-232 (DB-9) Ethernet port (RJ-45) USB Host Port (A-Type) for User Input and Storage Optional Bluetooth or WiFi Module |
| Control Panel | Power on/off button Calibration button Control key: FEED |
Before you order
- Measure your label. The print width in the specifications is the hard limit. Check your label stock against it, and check the core size your rolls are wound on, before the printer arrives.
- Check the software. This printer speaks the Godex languages. If you are replacing an existing printer, those emulations are usually what lets your current label formats keep working.
- Think about the consumables. The label and ribbon cost outruns the printer cost quickly. Tell us what you are printing and we will quote the stock alongside the hardware.
In the box
- GoDEX DT200+ label printer
- Power supply and lead
- USB cable
- GoLabel label design software
- Quick start guide
Frequently asked questions
Does it need a ribbon?
No. This is a direct thermal printer, so it prints onto heat sensitive label stock with no ribbon to buy or load. That keeps the running cost down. The trade off is that direct thermal print fades with heat and light over months, so it suits shipping labels and pick tickets rather than long life asset tags.
What does 203 dpi (8 dots/mm) actually mean for my labels?
Resolution is how many dots the head lays down per inch. 203 dpi (8 dots/mm) is the working figure for this model. Higher resolution matters when you are printing small text, fine logos or dense 2D barcodes onto small labels. For plain product and shipping labels the lower resolutions are usually sharper than they need to be already.
How fast is it and how wide can the label be?
Godex rates it at 178mm / sec (7 ips) with a maximum print width of 54mm (2.12"). The width is the limit on the label itself: anything wider than that cannot be filled edge to edge, so measure your label stock against that figure before ordering.
How does it connect?
As standard it offers USB 2.0 (B-Type) Serial port: RS-232 (DB-9) Ethernet port (RJ-45) USB Host Port (A-Type) for User Input and Storage Optional Bluetooth or WiFi Module. Tell us how the printer will sit on your network when you order and we will confirm you have the right build.
Is label design software included?
Godex supplies its GoLabel design software at no extra cost, which is enough to lay out and print labels without buying a third party package. If you already use a labelling or ERP system you will more likely drive the printer from that instead, through the language emulations listed in the specifications.
Who do I talk to about support?
POS Sales on 1300 026 062. We stock the Godex consumables and spare parts for this range, including print heads and platen rollers, so a worn head does not mean a new printer.
Can I see a sample label before I commit?
Call us on 1300 026 062. Choosing between resolutions and between direct thermal and thermal transfer is much easier against a printed sample of your own artwork than against a specification sheet.
The GoDEX DT200+ is a Godex label printer supplied by POS Sales. Key specifications: print method Direct Thermal; resolution 203 dpi (8 dots/mm); print speed 178mm / sec (7 ips); print width 54mm (2.12"); print length Min. 0.16" (4 mm)** - Max . 279.53" (7100 mm); processor 32-bit RISC CPU; memory Flash: 128 MB Flash and SDRAM: 128 MB; interface USB 2.0 (B-Type) Serial port: RS-232 (DB-9) Ethernet port (RJ-45) USB Host Port (A-Type) for User Input and Storage Optional Bluetooth or WiFi Module. GoLabel label design software is included by Godex at no extra cost, and POS Sales stocks the matching Godex consumables, upgrade kits and spare parts in Australia. Sold in Australia by POS Sales, 1300 026 062.
Supplied and supported in Australia by POS Sales, 1300 026 062. See the full label printer range.
Print Method:
Direct Thermal
Resolution:
203 dpi (8 dots/mm)
Print Speed:
178mm / sec (7 ips)
Print Width:
54mm (2.12")
Print Length:
Min. 0.16" (4 mm)** - Max . 279.53" (7100 mm)
Processor:
32-bit RISC CPU
Memory:
Flash: 128 MB Flash and SDRAM: 128 MB
Interface:
USB 2.0 (B-Type) Serial port: RS-232 (DB-9) Ethernet port (RJ-45) USB Host Port (A-Type) for User Input and Storage Optional Bluetooth or WiFi Module
Control Panel:
Power on/off button Calibration button Control key: FEED
1300 026 062