80mm Direct Thermal POS Printer
Bixolon SRP-E300 80mm Thermal Receipt Printer
Fast, compact 80mm desktop receipt printer with USB, Serial and Ethernet built in.
80mm (3") paper
Direct thermal
220 mm/s
USB / Serial / Ethernet
Auto-cutter
The Bixolon SRP-E300 is an 80mm direct thermal receipt printer built for everyday retail and hospitality point-of-sale. It prints at up to 220 mm per second, takes standard 80mm thermal rolls, and ships with USB, Serial (RS232) and Ethernet interfaces so it drops into single-till counters and networked multi-terminal setups alike. A built-in auto-cutter, a cash-drawer port and ESC/POS-compatible emulation make it a straightforward value-tier replacement for an ageing receipt printer.
Why choose the SRP-E300
220 mm/s printing
Receipts clear quickly at the till, even in a busy queue.
Three interfaces in one
USB, Serial and Ethernet on board, ready to wire in any way.
Auto-cutter built in
Cleanly cuts every receipt, rated to 1.5 million cuts.
Cash-drawer port
Drives a cash drawer (two ports via Y-adaptor) for a complete till.
Paper-saving mode
Trims receipt length by up to 25%, cutting roll consumption.
Compact footprint
Around 10% smaller than the SRP-330II, with wall-mount support.
Drops straight into your counter
Load an 80mm thermal roll, connect over USB for a single till or Ethernet for a networked, multi-register store, install the driver, and print. ESC/POS-compatible emulation with OPOS and JPOS driver support means it talks to the POS software most retail and hospitality venues already run, while the paper-saving mode keeps roll costs down.
Specifications
| Brand | Bixolon |
| Model | SRP-E300 |
| SKU / MPN | SRPE300UREG / SRP-E300ESK |
| GTIN (EAN) | 5706998647733 |
| Print method | Direct thermal (no ribbon) |
| Print speed | Up to 220 mm/sec |
| Resolution | 180 dpi |
| Paper width | 80mm (3") roll, up to 72mm print width |
| Interfaces | USB 2.0, Serial (RS232), Ethernet |
| Emulation | ESC/POS compatible (BXL/POS); OPOS, JPOS and Windows drivers |
| Auto-cutter | Yes, rated to 1.5 million cuts |
| Cash-drawer port | Yes (2 ports via Y-type adaptor) |
| Reliability | 150 km thermal print head life |
| Dimensions | 132 x 182.4 x 128.5 mm, 1.23 kg |
| Colour | Black |
| Warranty | 24 months return to base |
How it compares
| Model |
Form factor |
Interfaces |
Best for |
| Bixolon SRP-E300 |
Top-exit 80mm thermal |
USB / Serial / Ethernet |
Value-tier retail and hospitality tills |
| Bixolon SRP-F310II |
Front-exit 80mm thermal, spill-resistant |
USB / Serial / Ethernet |
Wet, spill-prone or front-access counters |
What's in the box
- Bixolon SRP-E300 thermal receipt printer
- USB cable
- Power supply
- Starter paper roll
- User guide and warranty card
Frequently asked questions
What paper does the SRP-E300 use?
It uses standard 80mm (3") direct thermal receipt rolls, with a maximum print width of 72mm. There is no ink or ribbon to replace. For most tills an 80x80mm thermal roll is the right fit.
Does it have an automatic cutter?
Yes. The SRP-E300 has a built-in auto-cutter that cleanly cuts each receipt, rated for up to 1.5 million cuts.
Which interfaces does it support?
This model includes USB 2.0, Serial (RS232) and Ethernet, all built in. Use USB for a single till, or Ethernet to share the printer across a networked, multi-terminal POS.
Can it open a cash drawer?
Yes. It has a cash-drawer (peripheral) port and supports two drawers via a Y-type adaptor, so a compatible 24V cash drawer pops on payment.
Will it work with my POS software?
The SRP-E300 uses ESC/POS-compatible emulation with OPOS, JPOS and Windows drivers, so it works with most POS systems. Some cloud POS platforms (for example Square) only support specific approved printer models, so check your POS provider's supported-hardware list or call us on 1300 026 062 before you buy.
How do I set it up over USB?
Install the Bixolon driver first, then connect the USB cable. Installing the driver before plugging in the printer is the single most common fix for a printer that will not print.
Is it a thermal or impact printer?
It is a direct thermal printer. It prints onto heat-sensitive thermal paper and needs no ink or ribbon. For a kitchen-style impact printer you would look at a different model such as the SRP-275III.
Where it fits
- Retail checkout counters needing fast, reliable receipts
- Cafes, takeaways and hospitality service counters
- Networked, multi-terminal POS that share one printer over Ethernet
- Value-tier upgrades or replacements for an older 80mm receipt printer
Don't forget the paper
The SRP-E300 runs on standard 80mm direct thermal rolls. Stock up and keep every till printing.
Shop thermal rolls
The Bixolon SRP-E300 (SKU SRPE300UREG, MPN SRP-E300ESK, GTIN 5706998647733) is an 80mm (3") direct thermal POS receipt printer printing at up to 220 mm/sec at 180 dpi with a maximum 72mm print width. It includes USB 2.0, Serial (RS232) and Ethernet interfaces, an auto-cutter rated to 1.5 million cuts, a cash-drawer port (two via Y-adaptor), ESC/POS-compatible emulation with OPOS, JPOS and Windows drivers, and a paper-saving mode that reduces receipt length by up to 25%. It measures 132 x 182.4 x 128.5 mm, weighs 1.23 kg, is black, and carries a 24-month return-to-base warranty.
Bixolon SRP-E300 · 80mm direct thermal receipt printer · USB / Serial / Ethernet · auto-cutter · ESC/POS · POS Sales Australia · 1300 026 062
1300 026 062
